LUNOtherm A60

Lunos Façade element

Draught-free, hygienic, soundproof LUNOtherm and almost invisible. With the LUNOtherm facade element the facade design is finally no longer restricted.

Buy Now

Description

Fan grilles on the outside wall are often considered as a disturbing element. By using the LUNOtherm facade element, the supply vent disappears from the wall surface. Further development of the LUNOtherm has made unrestricted facade design possible, due to its position in the window lintel or in the window reveal, the element is inserted directly into the insulation layer of the thermal insulation composite system (ETICS) and is almost invisible from the outside.

Advantages

For the first time, all benefits of air transfer devices, such as:

  • High air throughput
  • Draught-free design
  • Hygiene and sound insulation

can be made reality in conjunction with an almost invisible outer appearance.

Technical characteristics

The LUNOtherm is integrated into the insulation layer of the heat composite insulation system as a final element of the ALD. Supply air is then located in the window lintel, the reveal or underneath the window. It can be mounted above, to the side of the window or underneath the window, which also enables combination with a rolling shutter box.

The LUNOtherm is supplied in various insulation thickness and is applied by the builder in the same way as an insulation plate of external Insulation. Please request the detailed assembly instructions.

Since the LUNOtherm is mounted in the flashover range, suitability has been tested within the scope of general constructional admissibility of DIBt. Therefore, LUNOtherm A may be mounted in non-combustible WDVS pursuant to DIN 4102-A, and LUNOtherm B in flame-resistant WDVS pursuant to DIN 4102-B1 up to an insulation thickness of 300 mm.

The LUNOtherm A 60 can also be fitted easily into the masonry for new constructions. The bricks are appropriately recessed.

On account of the very low heat conductivity of the dam core of LUNOtherm of = 0.030 W/mK, the reduction of the heating insulation layer in the area of the ventilation gap is compensated. The temperature difference on the façade is max. 2.5 K.

Datasheet

Installation Guide